2
ENGLISH
SPECIFICATIONS
Model
407
Peak air flow
3.0m
3
/min.
Sealed suction
20.6 kPa (2,100 mm of water)
Recoverable capacity
Dust
32L
Dimensions (L x W x H)
478 mm x 422 mm x 699 mm
Net weight
10.3 Kg
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
ENB057-1
SAFETY INSTRUCTIONS
Warning: When using vacuum cleaner, safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury,
including the following.
READ ALL THESE
INSTRUCTIONS
1.
Do not use the cleaner without the filter.
Replace a damaged filter immediately.
2.
USE OF EXTENSION CORD. When using an
extension cord because of the great distance
to your power source, try to employ a cord that
is sufficiently thick but not too long, or cleaner
performance will be adversely affected. For
outdoor applications use an extension cord
suitable for outdoor use.
3.
VOLTAGE WARNING: Before connecting the
cleaner to a power source (receptacle, outlet,
etc.) be sure the voltage supplied is the same
as that specified on the nameplate of the
cleaner. A power source with voltage greater
than that specified for the cleaner can result in
SERIOUS INJURY to the user ? as well as
damage to the cleaner. If in doubt, DO NOT
PLUG IN THE CLEANER. Using a power
source with voltage less than the nameplate
rating is harmful to the motor.
4.
AVOID UNINTENTIONAL STARTING. Be sure
switch is OFF when plugging in.
5.
Do not attempt to pick up flammable materials,
fire works, lighted cigarettes, hot ashes, hot
metal chips, sharp materials such as razors,
needles, broken glass or the like.
6.
NEVER USE THE CLEANER IN THE VICINITY
OF GASOLINE, GAS, PAINT, ADHESIVES OR
OTHER HIGHLY EXPLOSIVE SUBSTANCES.
The switch emits sparks when turned ON and
OFF. And so does the motor commutator
during operation. A dangerous explosion may
result.
7.
Never vacuum up toxic, carcinogenic,
combustible or other hazardous materials
such as asbestos, arsenic, barium, beryllium,
lead, pesticides, or other health endangering
materials.
8.
Never use the cleaner outdoors in the rain.
9.
Do not use close to heat sources (stoves, etc.).
10.
GUARD AGAINST ELECTRIC SHOCK. Prevent
body contact with grounded surfaces. For
example; pipes, radiators, ranges, refrigerator
enclosures.
11.
Do not block cooling vents. These vents
permit cooling of the motor. Blockage should
be carefully avoided otherwise the motor will
burn out from lack of ventilation.
12.
Keep proper footing and balance at all times.
13.
DO NOT ABUSE CORD. Never carry the
cleaner by cord or yank it to disconnect from
receptacle. Keep cord away from heat, oil, and
sharp edges.
14.
Do not fold, tug or step on the hose.
15.
Stop the cleaner immediately if you notice
poor performance or anything abnormal
during operation.
16.
DISCONNECT THE CLEANER. When not in use,
before servicing, and when changing
accessories.
17.
Clean and service the cleaner immediately
after each use to keep it in tiptop operating
condition.
18.
MAINTAIN THE CLEANER WITH CARE. Keep
the cleaner clean for better and safer
performance. Follow instructions for changing
accessories.
Inspect
cleaner
cords
periodically and if damaged, have repaired by
authorized service facility. Inspect extension
cords periodically and replace if damaged.
Keep handles dry, clean, and free from oil and
grease.
19.
CHECK DAMAGED PARTS. Before further use
of the cleaner, a guard or other part that is
