P
3
/
6
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Motor Assembly
DISASSEMBLY
(1) Disassemble Front Cover from Housing set. (
Fig. 1
)
(2) Motor assembly can be disassembled as illustrated in
Figs. 3 to 9
.
Dust bag or
Paper pack
Bulb stay
Rear cover
connector of
Controller’s Lead wires
connector
of Battery
Rear cover
Viewed from the belly side of Product
Remove Dust bag (paper pack) together
with Bulb stay.
Remove Hanger by
pressing the both ends.
Remove Rear cover by sliding toward
the direction designated with black arrow.
Remove 3x16 Tapping screws from Housing set (R).
And disassemble Housing set (R).
Take out Motor section, disconnecting
receptacles from Motor’s terminals.
Remove Battery from
Housing set.
Disconnect the connector
of Controller’s Lead wires
from that of Battery.
Removed Hanger
Hanger
Battery
Bind PT3x16
Tapping screw (8 pcs.)
Housing set (R)
Motor assembly
Rubber ring and Fan cover are removed
from Motor assembly,.
Fan cover
Rubber ring
Receptacle
Motor Section
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
