8 ENGLISH
Dust bag
The use of the dust bag makes cutting operations clean
and dust collection easy. To attach the dust bag, fit it
onto the dust spout.
1
2
►
1.
Dust bag
2.
Dust spout
The neck of the dust spout rotates freely. Position the
dust bag so that you can operate the tool comfortably.
When the dust bag is about one-third full, remove the
dust bag from the tool and pull the fastener out. Empty
the dust bag of its contents, tapping it lightly so as to
remove particles adhering to the insides which might
hamper collection.
1
►
1.
Fastener
Connecting the vacuum cleaner
When you wish to perform clean cutting operation,
connect a Makita vacuum cleaner to your tool.
1
2
►
1.
Hose of the vacuum cleaner
2.
Dust spout
OPERATION
CAUTION:
THIS TOOL SHOULD ONLY BE
USED ON HORIZONTAL SURFACES.
CAUTION:
Be sure to move the tool forward
in a straight line and gently.
Forcing and exerting
excessive pressure or allowing the wheel to bend,
pinch or twist in the cut can cause overheating of the
motor and dangerous kickback of the tool.
Hold the tool firmly. Set the base plate on the workpiece
to be cut without the diamond wheel making any contact.
Then turn the tool on and wait until the diamond wheel
attains full speed. Now simply move the tool forward
over the workpiece surface, keeping it flat and advanc
-
ing smoothly until the cutting is completed. Keep your
cutting line straight and your speed of advance uniform.
