R
epair P 4 / 14
1.After taking off safety wire from gear housing cover, unscrew 4 pcs. of tapping screws CT 4 x 16.
Then, gear housing cover can be separated from gear housing. See Fig. 4.
< 5 > Disassembling gear housing cover section
4341T, 4341CT, 4341FCT
4 pcs. of
Tapping screws CT 4 x 16
Safety wire
Gear housing cover
Fig. 4
Fig. 5
2.Take off stop ring E-3 with small flat head screwdriver. And push slider to the lower dead point. See Fig. 5.
Stop ring E-3
Pin 4
Rod
Slider
Slider in the lower
dead point
Rod
3.Slide pin 4 in order to disconnect rod with slider. And then, pull out rod from gear housing cover.
Disassemble linear guides by unscrewing 4 ps. of pan head screws M4 x 10. So, leaf spring, pin 4 and slider can be
disassembled from gear housing cover. See Fig. 6.
Fig. 6
Rod
Pin 4
Slider
Pin 4
Slider
Linear guides
Linear guides
4 ps. of
Pan head
screws M4 x 10
Leaf spring
Gear housing
cover
