33
français
MAKITA 447 L
7 Maintenance
7.2 Travaux de
maintenance
7.2.1 Vidage de la cuve à
saletés
Seulement après l‘aspiration de
poussières inoffensives.
Seulement après avoir aspiré
des poussières inoffensives
sans sac d'évacuation:
7.2.2 Remplacement du sac
d‘évacuation
1. Séparez la partie supérieure
de l’aspirateur et la cuve.
2. Saisissez la cuve d’une
main par le creux ménagé
dans la partie inférieure et
déversez la matière aspirée.
3. Eliminez la matière aspirée
conformément aux disposi-
tions légales.
4. Nettoyez le bord de la cuve
avant de remettre la partie
supérieure de l’aspirateur.
Avant la repose du tuyau
flexible aspiration:
5. Nettoyez le raccord d’admis-
sion et le manchon du tuyau.
Lors des travaux suivants,
veillez à ne pas soulever inuti-
lement de la poussière. Portez
un masque de protection des
voies respiratoires P2.
1. Ouvrez les crochets de fer-
meture et séparez la partie
supérieure de l‘aspirateur et
la cuve à saletés.
2. Fermez le sac d‘évacuation
avec le serre-câble.
Après le travail
Au besoin
7.2.1 Vidage la cuve à saletés
n
7.2.2 Remplacement du sac
d'évacuation
n
7.2.3 Remplacement de la
cartouche filtrante
n
7.2.4 Contrôlez, si le tuyau
flexible et les acces
-
soires sout obstrués, si
nécessaire les nettoger
n
7.1 Plan de maintenance
3. Déboîtez avec précaution le
manchon du sac d‘évacua-
tion sur le raccord d‘admis-
sion.
4. Fermez le manchon du sac
d‘évacuation avec la cou-
lisse.
5. Eliminez les matières aspi-
rées conformément aux dis-
positions légales.
6. Introduisez un sac d‘éva-
cuation neuf dans la cuve
nettoyée, selon la notice
adjointe.
IMPORTANT !
Emboîtez vigoureusement le
manchon du sac d‘évacuation
sur le raccord d‘admission.