5500S
C
ONCEPTION AND MAIN APPLICATIONS
S
pecifications
Model 5500S is a new small and light tenon drill
suitable for machining 90mm or shorter material.
Features of this model are: high cost performance,
electric motor drive, high cutting performance and good
operability.
Tenonning Machine
Models No.
Description
Stand (support table)
Wrench (for adjustment of saw installation)
Bar (In order to stop the ratation flange
when the saw blade replacing)
New Tool
T
ECHNICAL INFORMATION
No Load Speed
Voltage (V)
Current (A)
Cycle (Hz)
Max.
Output(W)
Rip cut
Cross cut
100
15
50/60
1420
1650rpm
2200rpm
S
tandard equipment
-----------------------------------1
------1
----------------1
45 to 210mm
Right/ 20mm, Left/ 45mm (for 120mm wood)
80mm
92mm
68mm
0 to 130mm
245mm
240mm (lateral blade; 240mm, vertical blade; 155mm)
135mm
Vice width
Vice lateral movement
Vice lengthwise movement
Max. vertical cutting
Max. lateral cutting
Saw opening (tenon width)
Max. tenon length
Max. tenon hight
Max. cut-off width
C
apacity
Rip cut saw
Cross cut saw
Outer dimensions
Weight
Power Supply Cord
Round saw size
560W x 620L x 810H mm
68kg
5m
Outer dia. 235mm x thickness 1.45mm x hole dia. 16mm (50 blades)
Outer dia. 180mm x thickness 1.2mm x hole dia. 20mm (100 blades)
