5
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Removing or installing the bit
1
2
3
4
5
013633
To remove the bit, pull off the stop ring and the bit firmly.
To install the bit, insert the bit into the tool as far as it
goes. Then return the stop ring.
OPERATION
CAUTION:
•
When fitting the screw onto the point of the bit, be
careful not to push in on the screw. If the screw is
pushed in, the clutch engages and the screw
rotates suddenly. This may cause an injury or
damage a workpiece.
013637
Fit the screw on the point of the bit and place the point
of the screw on the surface of the workpiece to be
fastened. Apply pressure to the tool and start it.
Withdraw the tool as soon as the clutch cuts in. Then
release the switch trigger.
CAUTION:
•
Make sure that the bit is inserted straight in the
screw head, or the screw and/or bit may be
damaged.
•
Use the proper bit for the head of the screw that
you wish to use.
•
Do not continue unnecessary clutching operation.
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
•
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
•
These
accessories
or
attachments
are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use the accessories or
attachments for their stated purposes.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
Phillips bits
•
Socket bits
•
Stop ring (for socket bit)
•
Steel carrying case
NOTE:
•
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
1. Bit
2. Lock ring
3. Stop ring
4. Front cover
5. Clutch cover
