P 4/16
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Casing Assembly and Feeder Box Assembly (cont.)
R
epair
DISASSEMBLING
Fig. 7
7) While pressing the locking claws of Casing cover inward
using 1R291, pull off Feeder box section from Casing cover.
8) Remove Plate from Stopper base as follows:
while pressing down two Levers at the same time,
push Stopper base towards Feeder box fully until
it stops.
9) While pressing down two Levers
at the same time, separate Feeder box
from Stopper base.
10) Remove Lever and Compression Spring 2 (2 pcs each)
from Feeder box.
Fig. 8
1R291
Feeder box section
locking claw
of Casing cover
Casing complete
Feeder box
Plate
Stopper base
Plate
Lever
M4x12 Countersunk
head screw
Dial 42 can now be removed from
Casing complete by unscrewing
M4x12 Countersunk head screw.
Flat washer 6
O Ring 12
Shifter pin
Dial 42
Dial 42
Lever
Compression spring 2
Feeder box
Stopper base
Fig. 9
Fig. 10
Feeder box
