Makita 6933FD, Instruction Manual

10

Switch action

CAUTION:

•

Before inserting the battery cartridge into the tool,
always check to see that the switch trigger actuates
properly and returns to the “OFF” position when
released.

To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.

Electric brake

This tool is equipped with an electric brake. If the tool consis-
tently fails to quickly stop after switch trigger release, have
tool serviced at a Makita service center.

Lighting up the front lamp

CAUTION:

•

Do not look in the light or see the source of light directly.

Pull the switch trigger to light up the lamp. The lamp keeps
on lighting while the switch trigger is being pulled.

NOTE:

•

Use a dry cloth to wipe the dirt off the lens of lamp. Be
careful not to scratch the lens of lamp, or it may lower
the illumination.

Reversing switch action

This tool has a reversing switch to change the direction of
rotation. Depress the reversing switch lever from the A side
for clockwise rotation or from the B side for counterclockwise
rotation.

When the reversing switch lever is in the neutral position, the
switch trigger cannot be pulled.

CAUTION:

•

Always check the direction of rotation before operation.

•

Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.

•

When not operating the tool, always set the reversing
switch lever to the neutral position.

1. Switch trigger

1

004450

1. Lamp

1

004451

1. Reversing switch lever

A

B

1

1

004343