background image

5

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.

SYMBOLS

USD302-1

The followings show the symbols used for tool.

V

....................... volts

................... direct current

................... no load speed

.../min

................ revolutions or reciprocation per 

minute

................ number of blow

IMPORTANT SAFETY INSTRUCTIONS FOR 
CHARGER & BATTERY CARTRIDGE

USC001-3

1.

SAVE THESE INSTRUCTIONS - This man-
ual contains important safety and operat-
ing instructions for battery charger.

2.

Before using battery charger, read all
instructions and cautionary markings on
(1) battery charger, (2) battery, and (3)
product using battery.

3.

CAUTION - To reduce risk of injury,
charge only MAKITA rechargeable batter-
ies marked on the charger label. Other
types of batteries may burst causing per-
sonal injury and damage.

4.

Do not expose charger to rain or snow.

5.

Use of an attachment not recommended
or sold by the battery charger manufac-

turer may result in a risk of fire, electric
shock, or injury to persons.

6.

To reduce risk of damage to electric plug
and cord, pull by plug rather than cord
when disconnecting charger.

7.

Make sure cord is located so that it will
not be stepped on, tripped over, or other-
wise subjected to damage or stress.

8.

An extension cord should not be used
unless absolutely necessary. Use of
improper extension cord could result in a
risk of fire and electric shock. If extension
cord must be used, make sure:

a.

That pins on plug of extension cord
are the same number, size, and shape
as those of plug on charger;

n

˚

Summary of Contents for 6933FD





















Reviews: