P 2 / 8
R
epair
[2] LUBRICATION
Apply Makita grease N. No.2 to the following portions designated with the black triangle to protect
parts and product from unusual abrasion.
[1] NECESSARY REPAIRING TOOLS
CAUTION: Remove the battery from the machine for safety before repair/ maintenance !
Fig. 1
Hammer case comp.
Steel ball 3.5
19
Anvil M
20
Hammer
Groove for twenty four 3.5 Steel balls
25
Steel ball 5.6 (2pcs)
Whole surface
26
Spur gear 22 (2pcs)
Teeth portion
Teeth portion
27
Spindle
Insertion hole for Armature (Put 2g in the hole.)
28
Pin 5 (2pcs)
Surface that that contacts Spur Gear 22
(This pin is the gear shaft for .)
34
Internal gear 51
Surface that contacts Hammer case complete
Insertion hole for Spindle
Flat washer 24
Cup washer 14
Armature
Compression
spring 25
Code No.
Description
Use for
1R045
Gear extractor
Disassembling the Hammer mechanism
1R288
Screwdriver magnetizer
Removing Steel balls
1R291
Retaining ring S and R pliers
Disassembling the Bit holder section
1R346
Center attachment
Modular use with No.1R045
134847-1
Socket 30-78
Modular use with No.1R223
1R223
Torque wrench shaft 20-90 N.m
Removing Hammer case complete
1R224
Ratchet head 12.7
Modular use with No.1R223
Item No.
Description
Portion to lubricate
Steel ball 3.5 (24pcs)