P
2
/ 1
4
[1] NECESSARY REPAIRING TOOLS
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Code No.
Description
Use for
1R026
Bearing setting pipe 16-8.2
removing Spindle from Spiral bevel gear 52
1R005
Retaining ring R pliers RT-2N
removing Retaining ring R-32
1R027
1R032
1R217
Bearing setting pipe 18-10.2
removing Ball bearing 6201LLB
removing Spiral bevel gear 52
1R258
1R268
Spring pin extractor M3
1R269
1R283
Round bar for arbor 9-50
removing Spindle from Spiral bevel gear 52
1R291
1R350
Ring 60
holding Gear housing when removing Shaft lock pin
V block
holding Bearing box when removing Ball bearing 6201LLB
supporting Bearing box when removing Spiral bevel gear 52
[2] LUBRICATION
Apply
Makita Grease SG No. 0
to the portions designated with the black triangle to protect parts and product
from unusual abrasion.
And apply
Isoflex NB52
to the portion designated with the gray triangle.
Fig. 1
Item No.
18
Gear housing complete Gear room where Spiral bevel gear 52 engages with Armature’s gear.
38
Bearing box
Controller
Handle set L
Handle set R
Armature
Spiral bevel gear 52
Dial 28
apply Isoflex NB52 to Cam portion.
a little
25g approx.
Description
Amount
Portion to lubricate
Bearing setting plate 8.2
Bearing extractor
removing Ball baring 608 and Ball bearing 6201LLB
Retaining ring S & R pliers
removing Retaining ring S-12
Ring 22
R
epair
removing Shaft lock pin
38
18