2 ENGLISH
SPECIFICATIONS
Model:
9557NBR
9558NBR
Wheel diameter
115mm (4-1/2″)
125mm (5″)
Max. wheel thickness
6.4mm
Spindle thread
M14 or 5/8″ (country specific)
Rated speed (n)
11,000min
-1
Overall length
271mm
Net weight
2.0kg
2.1kg
Safety class
/II
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip
-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi
-
ronmentally compatible recycling facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord
-
ing to EN60745:
Sound pressure level (L
pA
) : 86 dB(A)
Sound power level (L
WA
) : 97 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN60745:
Model 9557NBR
Work mode: surface grinding
Vibration emission (a
h, AG
) : 7.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (a
h, DS
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model 9558NBR
Work mode: surface grinding
Vibration emission (a
h, AG
) : 8.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (a
h, DS
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
WARNING:
The declared vibration emission
value is used for main applications of the power tool.
However if the power tool is used for other applica-
tions, the vibration emission value may be different.
