11
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Wheel guard (wheel cover) for depressed center
wheel / multi disc
• Wheel guard (wheel cover) for abrasive cut-off wheel /
diamond wheel
• Depressed center wheels
• Abrasive cut-off wheels
• Multi discs
• Diamond wheels
• Wire cup brushes
• Wire bevel brush 85
• Abrasive discs
• Inner flange
• Lock nut for depressed center wheel / abrasive cut-off
wheel / multi disc / diamond wheel
• Lock nut for abrasive disc
• Lock nut wrench
• Side grip
• Rubber pad
• Dust cover attachment
NOTE:
• Some items in the list may be included in the tool pack-
age as standard accessories. They may differ from
country to country.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model 9561CVH, 9562CH, 9562CVH, 9564CV
Sound pressure level (L
pA
): 83 dB (A)
Sound power level (L
WA
): 94 dB (A)
Uncertainty (K): 3 dB (A)
Model 9565C, 9565CV
Sound pressure level (L
pA
): 82 dB (A)
Sound power level (L
WA
): 93 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 9561CVH
Work mode: surface grinding with normal side
grip
Vibration emission (a
h, AG
): 8.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: disc sanding
Vibration emission (a
h, DS
): 2.5 m/s
2
or less
Uncertainty (K): 1.5 m/s
2
Model 9562CH, 9562CVH
Work mode: surface grinding with normal side
grip
Vibration emission (a
h, AG
): 8.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: surface grinding with anti vibration
side grip
Vibration emission (a
h, AG
): 7.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: disc sanding
Vibration emission (a
h,
DS
): 2.5 m/s
2
or less
Uncertainty (K): 1.5 m/s
2
Model 9564CV
Work mode: surface grinding with normal side
grip
Vibration emission (a
h, AG
): 8.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: surface grinding with anti vibration
side grip
Vibration emission (a
h, AG
): 8.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: disc sanding
Vibration emission (a
h,
DS
): 2.5 m/s
2
or less
Uncertainty (K): 1.5 m/s
2
Model 9565C, 9565CV
Work mode: surface grinding with normal side
grip
Vibration emission (a
h, AG
): 8.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: surface grinding with anti vibration
side grip
Vibration emission (a
h, AG
): 7.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: disc sanding
Vibration emission (a
h,
DS
): 2.5 m/s
2
or less
Uncertainty (K): 1.5 m/s
2
ENG902-1
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
tool is used for other applications, the vibration emis-
sion value may be different.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
Summary of Contents for 9561CH
Page 4: ...4 17 18 19 22 23 014103 007365 010855 8 20 10 21 19 ...
Page 86: ...86 ...
Page 87: ...87 ...
