R
epair
P 2 / 15
< 1 > Lubrication
Apply MAKITA grease N. No.2 to the following portions designated by black triangle to protect
parts and product from unusual abrasion.
Gear case
Internal gear 47
Lock plate
Motor
bracket
44
47
48
49
54
Position
No.
Parts item
Carrier B
complete
Shaft for 47 Spur gear 18
Portion
to be lubricated
Amount : g
( oz )
44
Shaft for 49 Spur gear 19
47
Spur gear 18
Armature
Spur gear 9
Whole portion
Whole portion
Teeth portion which engages 49 spur gear.
48
49
Spur gear 19
54
1 (0.04)
1 (0.04)
< 2 > Disassembling bit holder section
< 3 > Assembling bit holder section
( 1 ) Remove ring spring. Then, flat washer 11, compression spring 13, sleeve and 2 pcs of steel 3 can be removed
from spindle. See Fig. 1.
( 1 ) Mount 2 pcs. of steel ball 3.
( 2 ) Mount sleeve.
( 3 ) Mount compression spring 13.
( 4 ) Mount flat washer 11.
( 5 ) Secure the above parts with spring washer to spindle.
Fig. 1
1R291
Retaining Ring S and R Pliers
Spindle
Flat washer 11
Sleeve
Steel ball 3
Steel ball 3
Compression spring 13
Head of clutch case
See Fig. 1.
