P 1
0
/ 1
2
W
iring diagram
FET
FET
Wiring to Switch
Connect the Lead wires to Switch, tilting their
Connectors to 45 degrees as drawn below.
Wiring in Housing L
Fix the FET Lead wires as follows:
yellow
with Lead wire holder
nearest to
Switch trigger
blue
with the
center
Lead wire holder
black
with Lead wire holder
farthest
from
Switch trigger
Lead wire
holder
yellow
blue
black
Switch trigger
Fig. D-4
Fig. D-5
Line filter
Seal
Put Line filter in
this place.
Sponge
Put the bundled Lead wires
into the groove of Sponge.
Pay attention, not to put
Lead wires on the Seal.
Lead wires connected to
Connector have to be fixed
with Lead wire holders.
Connector
Light circuit
with Battery fuel gauge available for the countries
other than North American countries
45 degrees
Brush holder complete
Put Pigtail of Carbon brush
in the area marked with gray
color to avoid pinching with
Rear cover.
Pig tail of Carbon brush
9 mm
9 mm
