[3] DISASSEMBLY/ASSEMBLY
[3] -1. Bit holder section for BHR261/ Holder section for Drill chuck of BHR261T
DISASSEMBLING for BHR261
DISASSEMBLING for BHR261T
Ring 21
Ring 21
Guide washer
Conical compression
spring 21-29
Cap 35
Steel ball 7.0
Chuck cover
Ring spring 19
Flat portion
Chuck cover
1R003
Remove Cap 35 with slotted screwdriver
and then remove Ring spring 19 with
1R003.
Ring 21
Remove Chuck cover.
Then remove Steel ball 7.0
while pressing down Ring 21.
Bit holder section can be
disassembled as illustrated above.
ASSEMBLING for BHR261
Take the disassembling step in reverse.
Note:
Be sure to place the flat portion of Ring spring 19 on Steel ball 7.0. (
Fig. 4)
Fig. 4
Fig. 5
Cap 35
1R003
Ring spring 19
Tool holder guide
Tool holder
Tool holder set
Separate Tool holder set from
Tool holder guide complete.
Remove Cap 35 and then remove
Ring spring 19 with 1R003.
Remove Chuck cover and then
remove Steel ball 7.0 while
pressing down Stopper.
Chuck cover
Steel ball 7.0
Stopper
Stopper
Change ring
Change cover
Ring spring 21
Torsion spring 31
Torsion spring 31
Guide washer
Flat washer 21
Flat washer 24
Leaf spring
Steel ball 5
Steel ball 6 (2 pcs.)
Conical compression
spring 21-29
Stopper, Guide washer, Conical
compression spring 21-29, Flat
washer 21 can be removed.
Remove Ring spring 21 with
1R004 From Tool holder
guide side.
Flat washer 24, Leaf spring
and Steel ball 5 can be
removed.
Remove Tool holder
together with Change
ring from Change cover.
And separate Change
ring from Tool holder.
After removing Torsion
spring 31, Steel ball 6
can be separated from
Tool holder.
Tool holder
R
epair
P
4
/ 2
1
