background image

2

Thank you very much for selecting the MAKITA blower. We are pleased
to be able to offer you the MAKITA blower which is the result of a long
development programme and many years of knowledge and experi-
ence.
The blower models BHX2500 combines the advantages of state-of-the-
art technology with ergonomic design. They are of light weight, handy,
compact and represent professional equipment for a great variety of
applications.
Please read, understand and follow this booklet which refers in detail to
the various points that will demonstrate its outstanding performance.
This will assist you to safety obtain the best possible results from your
MAKITA Blower.

Table of contents

Page

SYMBOLS............................................................................................ 2
SAFETY INSTRUCTIONS ................................................................... 3
TECHNICAL DATA ............................................................................... 6
DESIGNATION OF PARTS .................................................................. 7
ASSEMBLY INSTRUCTIONS .............................................................. 8
BEFORE START OF OPERATION ...................................................... 9
OPERATION ...................................................................................... 11
ADJUSTMENT OF IDLING ................................................................ 12
OPERATION METHOD...................................................................... 13
INSPECTION AND MAINTENANCE ................................................. 14
STORAGE.......................................................................................... 16
TROUBLESHOOTING ....................................................................... 18

SYMBOLS

It is very important to understand the following symbols when reading this instructions manual.

WARNING/DANGER

Fuel (Gasoline)

Read, Understand and Follow Instruction 
Manual

Engine-manual Start

Forbidden

Emergency Stop

No Smoking

First Aid

No Open Flame

Recycling

Protective Gloves must be Worn

ON/START

Keep the Area of Operation 
Clear of All Persons and Pets

OFF/STOP

Wear Eye and Ear Protection

Severing of fingers or hand, impeller blade

Summary of Contents for BHX2500V





















Reviews: