background image

3

SAFETY INSTRUCTIONS

General Instructions

• To ensure correct and safe operation, the user must read, understand

and follow this instruction manual to assure familiarity with the handling
of the blower (1). Users insufficiently informed will risk danger to them-
selves as well as others due to improper handling.

• It is recommended only to loan the blower to people who have proven

to be experienced with blowers.

• Always hand over the instruction manual.

• First-time users should ask the dealer for basic instructions to familiar-

ize oneself with the handling of a blower.

• Children and young persons aged under 18 years must not be allowed

to operate the blower. Persons over the age of 16 years may however
use the tool for the purpose of being trained only while under the direct
supervision of a qualified trainer.

• Use blowers with the utmost care and attention.

• Operate the blower only if you are in good physical condition.

• Perform all work conscientiously and carefully. The user has to accept

responsibility for others.

• Never use the blower while under the influence of alcohol or drugs (2).

• Do not use the unit when you are tired.

• Save these instructions for future referral.

Personal Protective Equipment

• The clothing worn should be functional and appropriate, I. e. It should

be tight-fitting but not cause a hindrance. Do not wear jewelry, clothing
or long hair which could be drawn into the air intake.

• In order to avoid head-, eye-, hand- or foot injuries as well as to protect

your hearing the following protective equipment and protective clothing
must be used during operation of the blower.

Pay particular attention to the following regulations

• Clothing must be sturdy and snug-fitting, but allow complete freedom

of movement. Avoid loose-fitting jackets, flared or cuffed pants, scarf,
unconfined long hair or anything that could be drawn into the air intake.
Wear overalls or long pants to protect your legs. Do not wear
shorts. (4)

• Blower noise may damage your hearing. Wear sound barriers (ear

plugs or ear mufflers) to protect your hearing. Continual and regular
users should have their hearing checked regularly. (3)

• Use of gloves when working with the blower is recommended. Good

footing is most important. Wear sturdy shoes with non slip soles. (4)

• Proper eye protection is a must. Even though the discharge is directed

away from the operator, ricochets and bounce backs can occur during
blower operation. (3)

• Never operate a blower unless wearing goggles or properly fitted

safety glasses with adequate top and side protection which comply
with ANSI Z 87. 1 (or your applicable national standard).

Starting up the blower

• Please make sure that there are no children or other people within a

working range of 15 meters (5), also pay attention to any animals in the
working vicinity. Never use the blower in urban areas.

• Before operating, always check that the blower is safe for operation:

Check the security of the throttle lever. The throttle lever should be
checked for smooth and easy action. Check for proper functioning of
the throttle lever lock. Check for clean and dry handles and test the
function of the l-O switch. Keep handles free of oil and fuel.

3

60°

(1)

(2)

(3)

(4)

(5)

15 meters

Summary of Contents for BHX2500V





















Reviews: