Makita BO6030J, Instruction Manual

7

MAINTENANCE 

CAUTION: 

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or
maintenance. 

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by Mak-
ita Authorized Service Centers, always using Makita
replacement parts.

OPTIONAL ACCESSORIES

CAUTION: 

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.

If you need any assistance for more details regarding
these accessories, ask your local Makita service center.

• Hook-and-loop type abrasive disc 
   (with pre-punched holes)
• Hook-and-loop type sponge pad 
• Hook-and-loop type felt pad 
• Hook-and-loop type wool pad
• Sanding cloth
• Paper dust bag
• Paper dust bag holder
• Pad 150

NOTE:

• Some items in the list may be included in the tool pack-

age as standard accessories. They may differ from
country to country.

ENG905-1

Noise

The typical A-weighted noise level determined according
to EN62841:

Sound pressure level (L

pA

): 77 dB (A)

Uncertainty (K): 3 dB (A)

The noise level under working may exceed 80 dB (A).

ENG907-1

NOTE:

• The declared noise emission value(s) has been mea-

sured in accordance with a standard test method and
may be used for comparing one tool with another.

• The declared noise emission value(s) may also be

used in a preliminary assessment of exposure.

WARNING:

•

Wear ear protection.

•

The noise emission during actual use of the power
tool can differ from the declared value(s) depend-
ing on the ways in which the tool is used especially
what kind of workpiece is processed.

•

Be sure to identify safety measures to protect the
operator that are based on an estimation of expo-
sure in the actual conditions of use (taking account
of all parts of the operating cycle such as the times
when the tool is switched off and when it is running
idle in addition to the trigger time).

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined
according to EN62841: 

Work mode: sanding metal plate
Vibration emission (a

h

): 4.0 m/s

2

Uncertainty (K): 1.5 m/s

2

ENG901-2

NOTE:

• The declared vibration total value(s) has been mea-

sured in accordance with a standard test method and
may be used for comparing one tool with another.

• The declared vibration total value(s) may also be used

in a preliminary assessment of exposure.

WARNING:

•

The vibration emission during actual use of the
power tool can differ from the declared value(s)
depending on the ways in which the tool is used
especially what kind of workpiece is processed.

•

Be sure to identify safety measures to protect the
operator that are based on an estimation of expo-
sure in the actual conditions of use (taking account
of all parts of the operating cycle such as the times
when the tool is switched off and when it is running
idle in addition to the trigger time).

EC DECLARATION OF CONFORMITY

For European countries only

The EC declaration of conformity is included as Annex A
to this instruction manual.