P 10 / 28
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear housing complete section
ASSEMBLING
5. Insert Outer spindle complete (29)
to Gear housing complete (25).
6. Tighten three M4x12 Pan head screws (34)
to Gear housing complete (25).
Fig. 19
Fig. 20
Fig. 21
(34)
1R252
(29)
(16)
< Note >
Spiral bevel gear 43 (16) cannot rotate smoothly
if it is mounted to the lower position than the edge
of Outer spindle complete (29).
(29)
(25)
(25)
(29)
1R252
(16)
7. Put Spiral bevel gear 43 (16) to
Outer spindle complete (29).
Apply 1R252 to Spiral bevel gear 43 (16).
8. Press 1R252 with Arbor press until the
hole edge of Spiral bevel gear 43 (16)
comes to the same level to the edge of
Outer spindle complete (29).
(29)
Edge of (29)
Hole edge of (16)
