P 8 / 28
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear housing complete section
DISASSEMBLING
14. Supporting Gear housing complete (25) with 1R032, 1R033, 1R034, remove Outer spindle complete section (29)
by pushing 1R247 with Arbor press. So, Spiral bevel gear 43 (16) is removed from Gear housing complete (25).
12. Remove Ball bearing
6001DDW (32) with 1R269.
<Note>
Do not reuse
Ball bearing 6001DDW (32).
13. Unscrew three M4x12
Pan head screws (28).
(32)
Fig. 14
Fig. 15
1R269
(28)
(29)
Do not re-use the parts items designated with this mark, because it is difficult to proceed
the repair without giving them damage or deformation.
Apply 1R032/ 1R033/ 1R034 to three circled portions.
<Note>
Do not apply them to Ball bearing.
(25)
1R032
1R033
1R034
(16)
(29)
1R247
(16)
(26) Retaining ring S-30
(27) Ball bearing 6906DDW
(29) Outer spindle complete
(29)
Outer spindle complete section (29)
(26)
(27)
(29)
