Makita BPB180, Technical Information

P 6 / 10

R

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -4. Lower Shaft

Fig. 13

Fig. 15

 DISASSEMBLING

 ASSEMBLING

1. Disassemble wheel with rubber tire from rear wheel cover (wheel cover of drive end) by unscrewing 
    hex socket head bolt M6x12.   (Fig. 5) 
2. Loosen hex socket head bolt M6x16, but stop to unscrew it at the position where it can be removed only by a few 
    turns.   (Fig. 13)
3. Strike the hex socket head bolt  with plastic hammer. Now lower shaft is pushed out of accepting hole, and it can be
    removed only by a few turns from hex socket head bolt.   (Fig. 14)

 Rear Wheel Cover

 Rear Wheel Cover

Turn hex socket head bolt clockwise. So lower
shaft is hoisted into the accepting hole.

You can only turn hex socket head bolt M6x16 clockwise for assembling lower shaft into the accepting hole.
(Fig. 15)

 Lower Shaft

 Lower Shaft

 Lower Shaft, assembled into
the accepting hole

Lower Shaft, pushed out
from accepting hole

Hex Socket 
Head Bolt M6x16

Hex Socket 
Head Bolt M6x16

Fig. 14

Hex Socket 
Head Bolt M6x16