10
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BTD044
Sound pressure level (L
pA
): 89 dB (A)
Sound power level (L
WA
): 100 dB (A)
Uncertainty (K): 3 dB (A)
Model BTD064
Sound pressure level (L
pA
): 91 dB (A)
Sound power level (L
WA
): 102 dB (A)
Uncertainty (K): 3 dB (A)
Model BTD104
Sound pressure level (L
pA
): 93 dB (A)
Sound power level (L
WA
): 104 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BTD044
Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
h
): 5.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Model BTD064
Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
h
): 7.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Model BTD104
Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
h
): 8.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Impact Driver
Model No./Type: BTD044, BTD064, BTD104
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3.9.2012
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
