R
epair
[3]-3 Rotor
DISASSEMBLING
ASSEMBLING
1. Housing R can be removed and Motor section can be
repaired without disassembling Bit holder section, Bumper,
Hammer case assembly and Change ring.
2. Remove Impact assembly together with
Motor section from Housing L. And separate
Motor section from Impact assembly.
Fig. 22
Separate Housing R from Housing L and disassemble Motor section (
Fig. 22
).
Fig. 23
Motor section
Impact
assembly
3. Put the Motor section on a workbench
from the drive end of the Rotor.
Press Stator down to separate it from Rotor.
Rotor
Stator set
Insert Rotor into Stator set on Work bench, held
by hand to control strong Magnet force of Rotor.
Slowly lift up Stator set while controlling the magnet force
of Rotor so as not to stick to Fan side abruptly.
Note: Assemble them by following steps in
Fig. 23
, while being careful not to pinch your finger
between Stator set and Rotor fan due to strong magnet force of Rotor.
Stator set
Rotor
Further assemble can be completed by taking the reverse step of disassembly (
Fig. 22
).
CAUTION IN HANDLING
Keep an appropriate distances when you put or store the plural rotors, otherwise, they will stick abruptly
each other and it will cause crack or break.
P 1
5
/
18
