[3] DISASSEMBLY/ASSEMBLY
[3] -5. Hammer section (cont.)
Fig. 17
Fig. 18
DISASSEMBLING
ASSEMBLING
Hammer and Steel balls 3.5,
viewed from above
(4) Disassemble Hammer section as drawn in
Fig. 17
.
Assemble Hammer section by reversing the disassembly procedure. (Refer to
Fig. 17
)
Note for Assembling
:
Before putting Flat washer 24 in Hammer, make sure that twenty-four Steel balls 3.5 are put in the groove of Hammer
as shown in
Fig. 18
.
There will appear a space equivalent to
one Steel ball 3.5 in the groove of Hammer
when twenty-four Steel balls 3.5 are put
in place.
Hammer
Hammer
Flat washer 24
Cup washer 14
Compression spring 26
Spindle
Steel ball 3.5 (24 pcs.)
R
epair
P
10
/ 1
5
