Fig. D-6
W
iring diagram
BTW074, BTW104
(equipped with Automatic Impact Stop System)
Rib F
LED
Boss
Rib A
Rib B
Rib D
Rib C
Connector box
Rib F
LED
Boss
Rib A
Rib B
Rib D
Rib C
Connector
(4 pin)
Route Lead wires (blue, red and gray)
of Impact finish indicator lamp and
the connecting Lead wire (black)
between Rib C and Rib D.
Impact finish indicator lamp
Route Lead wires (black, red) between
Rib A and the inner wall of Housing set (L).
Route lead wires (black, red) between
Rib A and Rib B so that they are not pinched
with Switch.
Route the bundle of Lead wires (blue,
black, red and gray) between Rib A
and the inner wall of Housing set (L).
Route the bundle of Lead wires (blue,
black, red and gray) between Rib B
and the inner wall of Housing set (L).
Route Lead wires (black, red) between Rib B
and the inner wall of Housing set (L).
Route Lead wires (black, red) between
the following Ribs.
* Rib of the Boss for Screw hole
* Rib of the Connector box
Connector (6 pin) for
connecting to Switch
Connector (4 pin) for
connecting to Impact
finish indicator lamp
Secure Lead wires of both Connectors
(4 pin) with Lead wire holders.
Connector (6 pin) for
connecting to Switch
Wiring of Lead wires for LED (before setting Switch)
Wiring of Lead wires for Impact finish indicator lamp (before setting Switch)
P 1
4
/ 1
5
