4
may result in loss of your eyesight.
5.
Do not short the built-in battery:
(1)
Do not touch the terminals with
any conductive material.
(2)
Avoid storing built-in battery in
a container with other metal
objects such as nails, coins, etc.
(3)
Do not expose built-in battery to
water or rain.
A battery short can cause a
large current flow, overheating,
possible burns and even a
breakdown.
6.
Do not store the tool and built-in
battery in locations where the
temperature may reach or exceed
50
゚
C (122
゚
F).
7.
Do not incinerate the built-in
battery even if it is severely
damaged or is completely worn out.
The built-in battery can explode in a
fire.
8.
Be careful not to drop or strike
battery.
SAVE THESE
INSTRUCTIONS.
Tips for maintaining maximum
battery life
1.
Charge the built-in battery before
completely discharged.
Always stop tool operation and
charge the built-in battery when
you notice less tool power.
2.
Never recharge a fully charged
built-in battery.
Overcharging shortens the battery
service life.
3.
Charge the built-in battery with
room temperature at 10
゚
C - 40
゚
C
(50
゚
F - 104
゚
F). Let a hot built-in
battery cool down before charging
it.
4.
Charge the battery cartridge once
in every six months if you do not
use it for a long period of time.
FUNCTIONAL
DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched
off before adjusting or checking
function on the tool.
Charging the built-in battery
CAUTION:
•
Do not operate the cleaner during
charging. It may be damaged.
•
Always disconnect the charging plug
from the cleaner after charging.
•
When you charge a new cleaner or a
cleaner which has been left uncharged for
a long time, it may not accept a full charge.
This is a normal condition and does not
indicate a problem. You can recharge the
cleaner fully after discharging it completely
a couple of times.
1
014724
1
014723
Use only the Makita charger DC1001 to
charge this cleaner. Use of the other type
chargers may cause the battery to burst,
result in personal injury and damage.
Charge the cleaner when using it for the
first time or uncharged for a long time.
Connect the charging plug to the charging
connector, then plug in the charger to the
1. Battery power
lamp
1. Charging
connector