background image

2 ENGLISH

WARNING

This appliance can be used by children aged from 8 years and 

above and persons with reduced physical, sensory or mental capa-

bilities or lack of experience and knowledge if they have been given 

supervision or instruction concerning use of the appliance in a safe 

way and understand the hazards involved. Children shall not play 

with the appliance. Cleaning and user maintenance shall not be 

made by children without supervision.

SPECIFICATIONS

Model:

CL108FD

Capacity

600 mL

Continuous use  

(with battery BL1016)

1 (Normal speed mode)

Approx. 25 min

2 (High speed mode)

Approx. 12 min

3 (Max speed mode)

Approx. 10 min

Overall length

956 mm

Rated voltage

D.C. 10.8 V - 12 V max

Net weight

1.0 - 1.2 kg

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications may differ from country to country.

• 

The weight does not include accessories but battery cartridge(s). The lightest and heaviest combination weight 

of the appliance and battery cartridge(s) are shown in the table.

Applicable battery cartridge and charger

Battery cartridge

BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B

Charger

DC10SA / DC10SB / DC10WC / DC10WD / DC18RE

• 

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING:

 

Only use the battery cartridges and chargers listed above.

 Use of any other battery cartridges 

and chargers may cause injury and/or fire.

Symbols

The following show the symbols used for the equipment. 

Be sure that you understand their meaning before use.

 

Read instruction manual.

 

Ni-MH

Li-ion

Only for EU countries  

Do not dispose of electric equipment or 

battery pack together with household waste 

material! In observance of the European 

Directives, on Waste Electric and Electronic 

Equipment and Batteries and Accumulators 

and Waste Batteries and Accumulators 

and their implementation in accordance 

with national laws, electric equipment and 

batteries and battery pack(s) that have 

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for collecting dry dust.

SAFETY WARNINGS

Cordless cleaner safety warnings

WARNING:

 

IMPORTANT! READ CAREFULLY 

all safety warnings and all instructions BEFORE 

USE .

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury.

1. 

Do not expose to rain. Store indoors.

2. 

Do not allow to be used as a toy. Close attention 

is necessary when used by or near children.

Summary of Contents for CL108FDWYW

















Reviews: