13 / 23
Fig. 25
4
Mount Retaining ring R-32 [1] with 1R291.
Fig. 26
5
Accepting Ball bearing 6201DDW, assembled in
the step of Fig. 24, with 1R028, stand Spindle/A[1]
inserting into the Ball bearing 6201DDW.
6
Press Spindle/A [1] with Arbor press. So, the
Spindle has been mounted to Bearing box section.
Fig. 27
7
Putting Spiral bevel gear 37 [1] on 1R291, insert
Spindle/A [2] into shaft hole of Spiral bevel
gear 37 [1].
8
Press Spindle/A/B [2] with Arbor press.
So, Spiral bevel gear 37 [1] has been press fitted to
Spindle/A [2].
1R291
[1]
[1]
1R028
1R029
[1]
[2]
