[3] DISASSEMBLY/ASSEMBLY
[3]-3. Gear section (cont.)
DISASSEMBLING
ASSEMBLING
P 11/ 17
R
epair
Fig. 12
(4) As for Oil seal 25 and Ball bearing 6805LLB,
remove them from Gear housing complete by
tapping the four notches on the top of
Gear housing complete in a crisscross manner
using a slotted screwdriver and plastic hammer.
(
Fig. 12
)
Note
: Apply a little amount of Grease or Lubricanting oil to the outer periphery of Oil seal 25 to prevent the improper
setting such as twisting.
four notches
Ball bearing
6805LLB
Oil seal 25
(1) Assemble Oil seal 25, Ball bearing 6805LLB and Ball bearing 606ZZ as illustrated in
Fig. 13
.
(2) Assemble Swash bearing and Spur gear 10 section as drawn in
Fig. 14
.
Fig. 13
Fig. 14
Ball bearing
6805LLB
1. Assemble Oil seal 25
with 1R232.
2. Assemble Ball bearing
6805LLB with 1R252.
3. Assemble Ball bearing
606ZZ with Spur gear 10.
4. Assemble Ball bearing 606ZZ
with Spur gear 10 to Inner
housing complete.
Oil seal 25
Ball bearing
6805LLB
Oil seal 25
1R232
1R252
Spur gear 10
Ball bearing 606ZZ
Ball bearing 606ZZ
Spur gear 10
1R033
Spur gear 10
Clutch cam
Swash
bearing
1. Stand Spur gear 10 on 1R033
and set Clutch cam and
Swash bearing in place.
2. Put Helical gear 22 on
Swash bearing with facing
the stepped side to Swash
bearing.
3. Put 1R032 onto Helical gear 22, and press it
down to Spur gear 10 as drawn below.
1R033
Helical gear 22
Helical gear 22
1R032
Stepped side