October 2015
4.4.4.
STATOR
4.4.4.1.
DISASSEMBLING
1. Remove Rotor ass’y (25). (See
2. Remove three 4x18 Tapping screws (11), then remove
Handle cover complete (12).
Figure 32
3. Remove Battery fuel gauge section and Terminal B from
Handle set (1).
4. Remove six 4x18 Tapping screws (4), then remove
Handle set (1).
Figure 33
6. Remove two 4x18 Tapping screws (19), then remove
Baffle plate (24).
7. Remove Stator (23).
Figure 34
4.4.4.2.
ASSEMBLING
Assemble by reversing the disassembly procedure.
(12)
(1)
Terminal B
Battery fuel gauge section
(23)
(11)
(4)
(19)
22 / 47
