Makita DMR110W, Instruction Manual

8

1.

Soft bended rod antenna

Using supplied AC power adaptor

Remove the rubber protector and insert the adaptor plug 
into the DC socket on the front side of the radio. Plug the 
adaptor into a standard mains socket outlet. Whenever 
the adaptor is used, the battery pack is automatically 
disconnected. The AC adaptor should be disconnected 
from the main supply when not in use.

1.

DC IN socket

2.

AUX IN 1

This radio has three tuning methods- Scan tuning, Manual 
tuning and Memory presets recall.

Selecting a station - DAB

1.

Press the Power button to switch on your radio.

2.

Select the DAB mode by pressing the Band button.

3.

Press the Advanced setting button and rotate the 
Volume/Tuning Control/Select knob until “Station List” 
is flashing on the screen. Press the Volume/Tuning 
Control/Select knob to enter the list of the stations.

4.

Rotate the Volume/Tuning Control/Select knob to 
scroll through the list of available stations. Press the 
knob to select the station.

5.

Adjust the desired volume by rotating the Volume/ 
Tuning Control/Select knob.

Display modes - DAB

Your radio has a range of display options in the DAB 
mode:
Press the Info button to cycle through the various options 
shown in the following letters (a. to g.).
a. Station name

Indicates the station name being 
listened to.

b. Program type

Indicates the type of station being 
listened to. E.g. Pop, Classics, News, 
etc.

c. Multiplex name Indicates the name of the DAB 

multiplex to which the current station 
belongs.

d. Time & date

Indicates the current time and date. 

e. Frequency and channel

Indicates the frequency and channel 
number for the currently tuned DAB 
station.

f. Bit rate/Audio type

Indicates the digital audio bit rate and 
audio type for the currently tuned 
DAB station.

g. Signal strength Indicates the signal strength for the 

currently tuned DAB station.

Finding new stations – DAB

From time to time, new DAB radio stations may become 
available. Or you may have moved to a different part of 
the country. In this case you may need to activate your 
radio to scan for new stations.
To allow the radio to find the available stations, it is 
recommended to carry out a full scan of the entire DAB 
Band III frequencies.

1.

Press the Auto tune button.

2.

Your radio will perform a full scan of the DAB 
frequencies. As new stations are found, the station 
counter on the left side in the display will increase and 
stations will be added to the list.

Manual tuning – DAB

Manual tuning allows you to tune your radio to a particular 
DAB frequency in Band III. This function can also be used 
to assist the positioning of the antenna or the radio so as 
to optimize reception for a specific channel or frequency.

1.

Press the Advanced setting button and rotate the 
Volume/Tuning Control/Select knob until “Manual 
Tune” shown on the display. Press the Volume/Tuning 
Control/Select knob to enter the manual tuning mode.

2.

Rotate the Volume/Tuning Control/Select knob to 
select the desired DAB channel. Press Volume/Tuning 
Control/Select knob to confirm the chosen frequency.

OPERATION

1

2

1