4
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Indicator lamps
2-2. Check button
3-1. Trigger
3-2. Lever
4-1. Sliding door
5-1. Lever
6-1. Trigger
7-1. Bolts
7-2. Driver guide cover
8-1. Lamp
8-2. Lever
9-1. Driver guide
9-2. Pin nails
9-3. Magazine
9-4. Lock lever
10-1. Driver guide cover
10-2. Protrusion
10-3. Nose adapter
10-4. Holder
12-1. Groove
12-2. Hook
12-3. Screw
13-1. Hex wrench
14-1. Trigger
14-2. Material to be fastened
16-1. Bolt (B)
16-2. Driver guide cover
16-3. Bolt (A)
SPECIFICATIONS
Model DPT350
DPT351
Pin nail size
0.6 x 18, 25, 30, 35 mm
0.6 x 18, 25, 30, 35 mm
Pin nail magazine capacity
130 pcs
130 pcs
Dimensions (L x W x H)
227 mm x 79 mm x 245 mm
227 mm x 79 mm x 249 mm
Battery Cartridge
BL1415N
BL1430 / BL1440 /
BL1450
BL1815 / BL1815N /
BL1820 / BL1820B
BL1830 / BL1840 /
BL1840B / BL1850 /
BL1850B
Net weight
1.8 kg
2.0 kg
1.9 kg
2.1 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE068-1
Intended use
The tool is intended for pressing pin nails into
construction materials such as timbers.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DPT350
Sound pressure level (L
pA
) : 75 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DPT351
Sound pressure level (L
pA
) : 74 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG904-2
Vibration
The vibration total value determined according to
EN60745:
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-18
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Pin Nailer
Model No./ Type: DPT350, DPT351
Conforms to the following European Directives:
2006/42/EC
