Robotic Cleaner
Model No.
DRC200
ENGLISH
Notes on Use
Using the Robotic Cleaner in an offi ce
Random mode is recommended in offi ce environments with
many desks, cabinets, and other obstacles.
Stow chairs and other objects under the desks to secure
path for cleaning that is at least
80 cm (2.6 ft.)
wide. Placing
chairs on top of desks will allow
the Robotic Cleaner to perform
cleaning even more smoothly.
Divide the room with
boundary tape or other
obstacles in order for the
Robotic Cleaner to avoid
certain sections.
Move tall, thin, and lightweight
objects to another room.The
Robotic Cleaner may run into these
objects and cause them to tip over.
80 cm (2.6 ft.) or
more
Do not place easily-damaged objects
in high locations such as on top of
tables. The impact from contact with
the Robotic Cleaner may cause these
objects to fall down.
Arrange LAN cables and other cords along the walls, cover
them with cable covers, or place objects in front of the cords to
serve as a barrier.
Use boundary tape or objects that are 15 cm (5-7/8")
in height or taller and can withstand the impact of the
Robotic Cleaner to divide wide areas into multiple
sections for cleaning.
Guidelines:
When using two BL1830s: 300 m
2
(3200 sq. ft.)
When using two BL1850s: 500 m
2
(5400 sq. ft.)
Fold any fl oor-covering
tassels beneath the fl oor
coverings.
Place obstacles in front of gaps that are approximately
the same height as the Robotic Cleaner. The Robotic
Cleaner may become stuck and unable to move.
18 cm (7-1/8")
