7 ENGLISH
1
►
1.
Speed adjusting dial
Number
Speed
1
10,000 min
-1
2
15,000 min
-1
3
20,000 min
-1
4
25,000 min
-1
5
30,000 min
-1
NOTICE:
If the tool is operated continuously at
low speed for a long time, the motor will get over
-
loaded, resulting in tool malfunction.
NOTICE:
When changing the speed dial from "5"
to "1", turn the dial counterclockwise. Do not turn
the dial clockwise forcibly.
Electronic function
The tool is equipped with the electronic functions for
easy operation.
•
Constant speed control
The speed control function provides the constant
rotation speed regardless of load conditions.
•
Soft start
The soft-start function minimizes start-up shock,
and makes the tool start smoothly.
Adjusting cutting depth
To adjust the cutting depth, open the lock lever, then
move the tool base up or down by turning the adjusting
screw. After the adjustment, close the lock lever firmly.
2
1
►
1.
Lock lever
2.
Adjusting screw
NOTICE:
If the tool is not secured after closing
the lock lever, tighten the hex nut, and then close
the lock lever.
1
►
1.
Hex nut
Adjusting cutting depth with the
plunge base
Optional accessory
1.
Place the tool on the flat surface.
2.
Select the stopper screw by rotating the stopper
base.
1
2
►
1.
Stopper screw
2.
Stopper base
3.
Loosen the stopper pole fixing nut, then pull up the
stopper pole while pressing the feed button.
2
3
1
►
1.
Stopper pole
2.
Fixing nut
3.
Feed button
