July 2015
4.1.
REPAIR OF LED CIRCUIT
- Use Non-insulated connector and Polyolefin tube (inner diameter: ø4.0mm) as shown below.
- When repairing, put terminals in the designated position shown in
. (Cut lead wires if necessary.)
Color index of lead wires' sheath
Black
White
Figure 40
LED circuit
Switch
Non-insulated
connector
Non-in
sulated
connec
tor
Shrink of Polyolefin tube
Shrink of Polyolefin
tube
2mm or more
2mm or more
End face of
Non-insulated
connector
End face of
Polyolefin tube
End face of
Polyolefin tube
白
AWG26
AWG26
AWG26
AWG26
AWG: American wire gauge
20 / 27