July 2015
6.
ASSEMBLY OF BRUSH HOLDER COMPLETE TO ARMATURE
6.1.
OVERVIEW
This model’s Brush holder complete (32) for repair has Spacer in its center part for easier repairing. (See
Follow the instructions below for assembling.
Figure 49
6.2.
CAUTION
(1) If you remove Spacer before assembling Brush holder complete (32) to Armature (30), Carbon brush (31) comes out from
Brush holder complete (32). This makes it difficult to assemble Armature (30). (See
(2) Carbon brushes may have breakage if they touch each other.
Figure 50
(32)
Concave shape fitted to the
outer circumference of the
bearing of Armature (30)
Rear view
裏
Spacer
25 / 27