![background image](http://html1.mh-extra.com/html/makita/dtd170/dtd170_technical-information_4247230013.webp)
5-4-2
Assembling
Assemble by reversing the disassembly procedure.
Fig. 5-4-2-1
Note in Assembling:
Before assembling Steel balls 3.5, check the following points:
·
Twenty-four Steel balls 3.5 are put in the groove of Hammer as shown below.
·
There is a gap equivalent to the size of one Steel ball 3.5.
Steel balls 3.5
(24 pcs.)
Hammer
Gap equivalent to the size of one Steel ball 3.5
13 / 19