2
ENGLISH
SPECIFICATIONS
Model:
DTW1001
DTW1001XV
DTW1002
DTW1002XV
DTW1004
DTW1004XV
DTW800
DTW800XV
Fastening
capacities
Standard bolt
M12 - M30
M12 - M24
High tensile
bolt
M10 - M24
M10 - M22
Square drive
19 mm
12.7 mm
–
Drive shank
–
11.1 mm Hex.
No load speed
(RPM)
Hard impact
mode
0 - 1,800 min
-1
0 - 2,000 min
-1
0 - 1,800 min
-1
Medium
impact mode
0 - 1,000 min
-1
Soft impact
mode
0 - 900 min
-1
Impacts per
minute
Hard impact
mode
0 - 2,200 min
-1
0 - 2,400 min
-1
0 - 2,200 min
-1
Medium
impact mode
0 - 2,000 min
-1
Soft impact
mode
0 - 1,800 min
-1
Overall length
229 mm
223 mm
229 mm
Rated voltage
D.C. 18 V
For use near high-voltage
electrical power lines
-
-
-
-
Net weight
3.4 - 3.7 kg
3.3 - 3.6 kg
3.1 - 3.4 kg
3.5 - 3.8 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and
waste accumulators and batteries, as well as
their adaptation to national law, waste elec-
trical equipment, batteries and accumulators
should be stored separately and delivered
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
