background image

2 ENGLISH

SPECIFICATIONS

Model:

DUB185

DUB186

Capacities

Air volume

0 - 3.2 m

3

/min

Air speed (average)

0 - 81 m/s

0 - 56 m/s

Air speed (max.)

0 - 98 m/s

0 - 68 m/s

Overall length

517 mm *1

861 mm *2

Rated voltage

D.C. 18 V

Net weight

With nozzle

1.6 - 2.1 kg

-

With garden nozzle

-

1.6 - 2.1 kg

*1. With nozzle and battery cartridge, and without dust bag.
*2. With garden nozzle and battery cartridge, and without dust bag.
• 

Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• 

Specifications may differ from country to country.

• 

The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi

-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge

BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / 

BL1840B / BL1850 / BL1850B / BL1860B

Charger

DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / 

DC18SH / DC18WC

• 

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING:

 

Only use the battery cartridges and chargers listed above.

 Use of any other battery cartridges 

and chargers may cause injury and/or fire.

Recommended battery adapter

Battery adapter

PDC01

• 

The battery adapter(s) listed above may not be available depending on your region of residence.

• 

Before using the battery adapter, read instruction and cautionary markings on the battery adapter.

Symbols

The followings show the symbols which may be used 

for the equipment. Be sure that you understand their 

meaning before use.

Take particular care and attention.

 

Read instruction manual.

Keep hands away from rotating parts.

Long hair may cause entanglement 

accident.

 

Keep bystanders away.

 Wear eye and ear protection.

 Do not expose to moisture.

 

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or battery 

pack together with household waste material!

In observance of the European Directives, 

on Waste Electric and Electronic 

Equipment and Batteries and Accumulators 

and Waste Batteries and Accumulators 

and their implementation in accordance 

with national laws, electric equipment and 

batteries and battery pack(s) that have 

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The machine is intended for blowing and vacuuming.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-1:

Model DUB185

Sound pressure level (L

pA

) : 83 dB(A)

Sound power level (L

WA

) : 94 dB (A)

Uncertainty (K) : 3 dB(A)
The typical A-weighted noise level determined accord-

ing to EN50636-2-100:

Summary of Contents for DUB185F001













Reviews: