8 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DUH504S
DUH604S
DUH754S
Blade length
500 mm
600 mm
750 mm
Strokes per minute
2,000 / 3,600 / 4,400 min
-1
Overall length
953 mm
1,061 mm
1,200 mm
Rated voltage
D.C. 18 V
Net weight
3.2 - 3.9 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended battery adapter
Battery adapter
PDC01
•
The battery adapter(s) listed above may not be available depending on your region of residence.
•
Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Do not expose to moisture.
Beware of pinching.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col
-
lected separately and returned to an envi
-
ronmentally compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Summary of Contents for DUH504S
