9 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DUN500W
DUN600L
Blade length
500 mm
600 mm
Strokes per minute
2,000 / 3,600 / 4,400 min
-1
Cutting blade angle
115° (up 45°, down 70°)
–
Overall length
2,115 mm
2,050 mm
Rated voltage
D.C. 18 V
Net weight
3.9 - 4.3 kg
3.7 - 4.1 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended battery adapter
Battery adapter
PDC01
•
The battery adapter(s) listed above may not be available depending on your region of residence.
•
Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Do not expose to moisture.
Wear a helmet, goggles and ear protection.
DANGER - Keep hands away from blade.
Beware of electrical lines, risk of electrical
shock.
Keep distance at least 15 m.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or battery
pack together with household waste material!
In observance of the European Directives, on Waste
Electric and Electronic Equipment and Batteries and
Accumulators and Waste Batteries and Accumulators
and their implementation in accordance with national
laws, electric equipment and batteries and battery
pack(s) that have reached the end of their life must
be collected separately and returned to an environ
-
mentally compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-4-2:
Model DUN500W
Sound pressure level (L
pA
) : 81.5 dB(A)
Sound power level (L
WA
) : 92.5 dB (A)
Uncertainty (K) : 3 dB(A)
Model DUN600L
Sound pressure level (L
pA
) : 82.5 dB(A)
Sound power level (L
WA
) : 93.5 dB (A)
Uncertainty (K) : 3 dB(A)
Summary of Contents for DUN600L
