Makita DUR187U, Original Instructions Manual

13 ENGLISH

1

2

3

►    

1.

 Plastic blade 

2.

 Metal guard 

3.

 Hex wrench

1.

Turn the tool upside down so that you can replace 

the cutting tool easily.

2.

Insert the hex wrench through the hole on the 

motor housing and rotate the spindle until the spindle is 

locked.

3.

Place the plastic blade onto the threaded spindle 

directly and tighten it by turning it counterclockwise.

4.

Remove the hex wrench.

To remove the plastic blade, turn it clockwise while hold-

ing the receive washer with the hex wrench.

Adjusting the handle/hanger 

position

Adjust the handle and hanger position to obtain confort

-

able handling of the tool.

For DUR187U and DUR188U

Loosen the hex socket head bolts on the bottom of the 

handle holder. Move the handle to a comfortable work

-

ing position and then tighten the bolts.

1

2

3

►    

1.

 Handle holder 

2.

 Hex socket head bolt 

3.

 Handle

Loosen the Hex socket head bolts on the hanger. Move 

the hanger to a comfortable working position and then 

tighten the bolts.

1
2

►    

1.

 Hex socket head bolt 

2.

 Hanger

For DUR187L and DUR188L

Loosen the hex socket head bolts on the handle. Move 

the handle to a comfortable working position and then 

tighten the bolts.

2

1

►    

1.

 Hex socket head bolt 

2.

 Handle

Loosen the hex socket head bolt on the hanger. Move 

the hanger to a comfortable working position and then 

tighten the bolt.

1
2

►    

1.

 Hex socket head bolt 

2.

 Hanger