Makita DUR187U, Original Instructions Manual

3 ENGLISH

6. 

Before using the machine and after any 

impact, check for signs of wear or damage and 

repair as necessary.

7. 

Take care against injury from any device 

fitted for trimming the filament line length. 

After extending new cutter line always return 

the machine to its normal operating position 

before switching on.

8. 

Never fit metal cutting elements.

9. 

This appliance is not intended for use by per-

sons (including children) with reduced physical, 

sensory or mental capabilities, or lack of expe-

rience and knowledge, unless they have been 

given supervision or instruction concerning use 

of the appliance by a person responsible for 

their safety. Children should be supervised to 

ensure that they do not play with the appliance.

10. 

Use the tool with the utmost care and 

attention.

11. 

Operate the tool only if you are in good phys-

ical condition. Perform all work calmly and 

carefully. Use common sense and keep in mind 

that the operator or user is responsible for 

accidents or hazards occurring to other people 

or their property.

12. 

Never operate the tool when tired, feeling ill or 

under the influence of alcohol or drugs.

13. 

The tool should be switched off immediately if 

it shows any signs of unusual operation.

Intended use of the tool

1. 

Use right tool. The cordless grass trimmer is 

only intended for cutting grass, light weeds. It 

should not be used for any other purpose such 

as hedge cutting as this may cause injury.

Personal protective equipment

1. 

Dress Properly. The clothing worn should be 

functional and appropriate, i.e. it should be 

tight-fitting but not cause hindrance. Do not 

wear either jewelry or clothing which could 

become entangled with high grass. Wear pro-

tective hair covering to contain long hair.

2. 

When using the tool, always wear sturdy shoes 

with a non-slip sole. This protects against 

injuries and ensures a good footing.

3. 

Wear protective glasses or goggles.

Electrical and battery safety

1. 

Avoid dangerous environment. Don't use the 

tool in damp or wet locations or expose it to 

rain. Water entering the tool will increase the 

risk of electric shock.

2. 

Recharge only with the charger specified by 

the manufacturer. A charger that is suitable for 

one type of battery pack may create a risk of 

fire when used with another battery pack.

3. 

Use power tools only with specifically desig

-

nated battery packs. Use of any other battery 

packs may create a risk of injury and fire.

4. 

When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 

objects, that can make a connection from one 

terminal to another. Shorting the battery termi-

nals together may cause burns or a fire.

5. 

Under abusive conditions, liquid may be ejected 

from the battery; avoid contact. If contact 

accidentally occurs, flush with water. If liquid 

contacts eyes, seek medical help. Liquid ejected 

from the battery may cause irritation or burns.

6. 

Do not dispose of the battery(ies) in a fire. The 

cell may explode. Check with local codes for 

possible special disposal instructions.

7. 

Do not open or mutilate the battery(ies). Released 

electrolyte is corrosive and may cause damage 

to the eyes or skin. It may be toxic if swallowed.

Starting up the tool

1. 

Make sure that there are no children or other 

people within a working range of 15 meters 

(50 ft), also pay attention to any animals in the 

working vicinity. Otherwise stop using the tool.

2. 

Before use always check that the tool is safe 

for operation. Check the security of the cutting 

tool and the guard and the switch trigger/lever 

for easy and proper action. Check for clean 

and dry handles and test the on/off function of 

the switch.