13 ENGLISH
23.
Do not operate the tool in bad weather or if
there is a risk of lightning.
24.
Operate the tool only if you are in good phys-
ical condition. Perform all work calmly and
carefully. Use common sense and keep in mind
that the operator or user is responsible for
accidents or hazards occurring to other people
or their property.
25.
Except in case of emergency, never drop
or cast the tool to the ground or this may
severely damage the tool.
26.
Never drag the tool on the ground when mov-
ing from place to place, the tool may become
damaged if moved in this manner.
27.
Don't force the tool. It will do the job better and
with less likelihood of a risk of injury at the
rate for which it was designed.
Cutting tools
1.
Do not use a cutting tool which is not recom-
mended by us.
2.
Use an applicable cutting attachment for the
job in hand.
—
Nylon cutting heads (string trimmer heads)
are suitable for trimming lawn grass.
—
Never use other blades including metal
multi-piece pivoting chains and flail blades. It
may result in serious injury.
3.
Only use the cutting tool that are marked with
a speed equal or higher than the speed marked
on the tool.
4.
Always keep your hands, face, and clothes
away from the cutting tool when it is rotating.
Failure to do so may cause personal injury.
5.
Always use the cutting attachment guard prop-
erly suited for the cutting attachment used.
6.
Take care against injury from any device
fitted for trimming the filament line length.
After extending new cutter line always return
the machine to its normal operating position
before switching on.
Vibration
1.
People with poor circulation who are exposed
to excessive vibration may experience injury
to blood vessels or the nervous system.
Vibration may cause the following symptoms
to occur in the fingers, hands or wrists: "Falling
asleep" (numbness), tingling, pain, stabbing sen-
sation, alteration of skin color or of the skin. If any
of these symptoms occur, see a physician!
2.
To reduce the risk of "white finger disease",
keep your hands warm during operation and
well maintain the tool and accessories.
Transport
1.
Before transporting the tool, turn it off and
remove the battery cartridge.
2.
When transporting the tool, carry it in a hori-
zontal position by holding the shaft.
3.
When transporting the tool in a vehicle, prop-
erly secure it to avoid turnover.
Otherwise
damage to the tool and other baggage may result.
Maintenance
1.
Have your tool serviced by our authorized
service center, always using only genuine
replacement parts.
Incorrect repair and poor
maintenance can shorten the life of the tool and
increase the risk of accidents.
2.
Before doing any maintenance or repair work
or cleaning the tool, always turn it off and
remove the battery cartridge.
3.
Always clean dust and dirt off the tool. Never
use gasoline, benzine, thinner, alcohol or the
like for the purpose.
Discoloration, deformation
or cracks of the plastic components may result.
4.
After each use, tighten all screws and nuts.
5.
Do not attempt any maintenance or repair not
described in the instruction manual. Ask our
authorized service center for such work.
6.
Always use our genuine spare parts and
accessories only.
Using parts or accessories
supplied by a third party may result in the tool
breakdown, property damage and/or serious
injury.
7.
Request our authorized service center to
inspect and maintain the tool at regular
interval.
8.
Always keep the tool in good working condi-
tion.
Poor maintenance can result in inferior per-
formance and shorten the life of the tool.
9.
Keep handles dry, clean and free from oil and
grease. Keep all cooling air inlets clear of
debris.
10.
After use, disconnect the battery cartridge
from the tool and check for damage.
Storage
1.
Before storing the tool, perform full clean-
ing and maintenance. Remove the battery
cartridge.
2.
Store the tool in a dry and high or locked loca-
tion out of reach of children.
3.
Do not prop the tool against something, such
as a wall.
Otherwise it may fall suddenly and
cause an injury.
First aid
1.
Always have a first-aid kit close by.
Immediately replace any item taken from the
first aid kit.
2.
When asking for help, give the following
information:
—
Place of the accident
—
What happened
— Number of injured persons
— Nature of the injury
—
Your name
Summary of Contents for DUR192LZ
