14
Remaining battery capacity indication
(Country specific)
Fig.5
Press the check button to make the battery indicators
show the remaining battery capacities. The battery
indicators correspond to each battery.
Remaining battery capacity indication
Battery
i
nd
i
cators
(Battery
1
or
Battery
2)
Rema
i
n
i
ng
capac
i
ty
On
Off
B
li
nk
i
ng
50%
to
100%
20%
to
50%
0%
to
20%
or
Charge
the
battery
014809
Abnormal indications during use
Battery
i
nd
i
cator
Status
On
Off
Battery
1
Battery
2
T
he
too
l
may
have
ma
l
funct
i
oned
.
T
he
too
l
may
have
ma
l
funct
i
oned
.
T
he
protect
i
ve
funct
i
on
for
battery
w
i
th
star
mark
i
ng
operated
(overheat)
.
F
ew
rema
i
n
i
ng
capac
i
ty
,
charge
the
battery
.
T
he
too
l
detected
an
abnorma
ll
y
h
i
gh
vo
l
tage
.
Rep
l
ace
battery
cartr
i
dge
.
014811
The indicators show various states using the remaining
battery capacity indication.
Power switch action
WARNING:
•
Before inserting the battery cartridge into the
tool, always check to see that the switch
trigger actuates properly and returns to the
"OFF" position when released. Do not pull the
switch trigger hard without turning the lock-off
lever. This can cause switch breakage.
Operating a tool with a switch that does not
actuate properly can lead to loss of control and
serious personal injury.
Fig.6
Push the power button on the housing so that the tool is
powered on and power indicator lights.
For model DUR361U
Fig.7
For model DUR362L
Fig.8
To prevent the switch trigger from being accidentally
pulled, a lock-off lever is provided.
To start the tool, turn the lock-off lever and then pull the
switch trigger. Release the switch trigger to stop.
NOTE:
•
After the power button is pushed and the tool is
left one minute without any operations, the tool is
automatically powered off.
Reversing Switch for Debris Removal
WARNING:
•
Always be sure that the tool is switched off
and battery cartridge is removed before
removing weeds or debris entangled in the tool
that could not be removed when operated in
the reverse mode.
Failure to switch off and
remove the battery cartridge may result in serious
personal injury from accidental start-up.
For model DUR361U
Fig.9
For model DUR362L
Fig.10
This tool has a reversing switch which is only provided to
change the direction of rotation so that it can be used to
remove weeds and debris entangled in the tool. To operate the
tool normally the "A" side of the switch should be depressed.
To remove weeds and debris that are jammed in the rotating
head the tool can be reversed by depressing the "B" side of
the switch. In the reverse position the tool will only operate for
a short period of time and automatically shut off.
NOTICE:
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes
to a complete stop. Changing the direction of
rotation before the tool stops may damage it.
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com
