Makita DUR369LPT2, Instruction Manual

12 ENGLISH

Speed adjusting

You can select the tool speed by tapping the main 

power button. Each time you tap the main power button, 

the level of speed will change.

2

1

►    

1.

 Speed indicator 

2.

 Main power button

Speed indicator

Mode

Rotation speed

High

0-7,000 min

-1

Medium

0-5,500 min

-1

Low

0-4,600 min

-1

Automatic Torque Drive Technology

When you turn on the Automatic Torque Drive 

Technology (ADT), the tool runs at optimum rotation 

speed and torque for the condition of grass being cut.
To start ADT, press and hold the reverse button until the 

ADT indicator turns on. After that, tap the main power 

button to select the cutting tool attached to the tool. 

Light the lamp beside 

 marking to select cutter blade 

and plastic blade, 

 marking to select nylon cutting 

head.

To stop ADT, press and hold the reverse button until the 

ADT indicator turns off.

5

4

1

2

3

►    

1.

 marking 

2.

 marking 

3.

 ADT indicator 

4.

 Main power button 

5.

 Reverse button

Indicator

Mode

Cutting tool

Rotation 

speed

ADT(Cutter 

blade)

Cutter blade 

Plastic blade

3,500-7,000 

min

-1

ADT(Nylon 

cutting head)

Nylon cutting 

head

3,500-5,500 

min

-1

Reverse button for debris removal

WARNING:

Switch off the tool and remove 

the battery cartridge before you remove entan-

gled weeds or debris which the reverse rotation 

function can not remove.

 Failure to switch off and 

remove the battery cartridge may result in serious 

personal injury from accidental start-up.

This tool has a reverse button to change the direction of 

rotation. It is only for removing weeds and debris entan-

gled in the tool.

To reverse the rotation, tap the reverse button and pull 

the switch trigger while depressing the lock-off lever 

when the cutting tool is stopped. The speed indicators 

and ADT indicator start blinking, and the cutting tool 

rotates in reverse direction when you pull the switch 

trigger.

To return to regular rotation, release the trigger and wait 

until the cutting tool stops.

3

1

2

►    

1.

 Speed indicator 

2.

 ADT indicator 

3.

 Reverse 

button