Makita DVC261ZX8, Instruction Manual

3 ENGLISH

Ni-MH

Li-ion

Only for EU countries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical 

and electronic equipment, accumulators 

and batteries may have a negative impact 

on the environment and human health.

Do not dispose of electrical and electronic 

appliances or batteries with household 

waste!

In accordance with the European Directive 

on waste electrical and electronic equip-

ment and on accumulators and batteries 

and waste accumulators and batteries, 

as well as their adaptation to national law, 

waste electrical equipment, batteries and 

accumulators should be stored separately 

and delivered to a separate collection point 

for municipal waste, operating in accor-

dance with the regulations on environmen-

tal protection.

This is indicated by the symbol of the 

crossed-out wheeled bin placed on the 

equipment.

Intended use

The tool is intended for collecting dry dust. The tool 

is suitable for commercial use, for example in hotels, 

schools, hospitals, factories, shops, offices and rental 

businesses.

Noise

The typical A-weighted noise level determined accord-

ing to IEC60335-2-69, IEC60704-2-1:

Sound pressure level (L

pA

) : 70 dB(A) or less

Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB (A).

NOTE:

 The declared noise emission value(s) has 

been measured in accordance with a standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared noise emission value(s) 

may also be used in a preliminary assessment of 

exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the 

tool is used especially what kind of workpiece is 

processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to IEC60335-2-69:

Work mode: operation without load

Vibration emission (a

h

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during 

actual use of the power tool can differ from the 

declared value(s) depending on the ways in which 

the tool is used especially what kind of workpiece 

is processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

Cordless vacuum cleaner safety 

warnings

WARNING:

IMPORTANT! READ CAREFULLY 

all safety warnings and all instructions BEFORE 

USE.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury.

1. 

Before use, make sure that this cleaner must 

be used by people who have been adequately 

instructed on the use of this cleaner.

2. 

Do not use the cleaner without the filter. 

Replace a damaged filter immediately.

3. 

Do not attempt to pick up flammable materials, 

fire works, lighted cigarettes, hot ashes, hot 

metal chips, sharp materials such as razors, 

needles, broken glass or the like.

4. 

NEVER USE THE CLEANER IN THE VICINITY 

OF GASOLINE, GAS, PAINT, ADHESIVES OR 

OTHER HIGHLY EXPLOSIVE SUBSTANCES. 

The switch emits sparks when turned ON and 

OFF. And so does the motor commutator during 

operation. A dangerous explosion may result.

5. 

This cleaner is not suitable for picking up 

hazardous dust.

6. 

Never vacuum up toxic, carcinogenic, com-

bustible or other hazardous materials such as 

asbestos, arsenic, barium, beryllium, lead, pes-

ticides, or other health endangering materials.

7. 

Never use the cleaner outdoors in the rain.

8. 

For Finland, this machine is not to be used 

outdoors at low temperature.

9. 

Do not use close to heat sources (stoves, etc.).