18 / 71
4-3-6
Disconnecting Control cable
1
Disconnect two Straight terminals and remove two Strain relieves. (Refer to Fig. 15 and Fig. 16.)
Fig. 39
2
With a slotted screwdriver, pry up the locking tab to
remove Carburetor cover [1].
Fig. 40
3
Turn Throttle [1] clockwise and hold it there with your
finger. Then remove the end of Control cable from
Swivel [2], and then pull it off from Adjust screw [3].
[1]
[2]
[3]
[1]
